Volusia Powder Coating

Price Lists

We can customize steel tumblers with your artwork, your favorite team and/or your name. Please see our Photo Gallery for more examples of our work.

Prices range from $30 to $60 depending on what you want and if you supply your own cup. We stock Ozark Trail cups 20 & 30 oz. $8 & $10 each.

Automotive Parts | Motorcycle Parts | ATV Parts | Rims

Keep in mind, All prices include abrasive blasting, thread masking, or other preparations as needed. Parts are to be free from any plastic, rubber, bearings, excessive dirt, oil, and grease.

Prices are for single stage coating using in stock colors. Special order colors will incur an additional charge to cover cost and shipping.

Cast parts such as aluminum as well as clad items such as chrome plated parts may experience “out gassing” which is bubbles in the powder coating caused by gasses escaping the part during curing in the oven. We will take every precaution to avoid this but we cannot be held responsible for any bubbling caused by porous castings or clad items.

Clear coat is REQUIRED over most chromes, metallics, silvers, and certain other colors. Clear coating of any part adds 50% to the price. Multi-stage coatings add 50% per stage.

We will warranty against cracking, flaking, or peeling for 1 year on new parts and 6 months on all used parts. If your item is not listed in our price lists please let us know what you have and we will work with you to get the job done.

***Prices are minimums and subject to change without notice.***

Automotive Parts

Car part: Single coat application Two coat application
A-Arm - Control Arms, Lower Per Pair 92.00 128.75
A-Arm - Control Arms, Upper Per Pair 73.00 100.00
A-Arm (Tubular) - Control Arms, Upper Per Pair 62.00 82.00
A-Arm (Tubular) - Control Arms, Lower Per Pair 89.00 121.00
Air Cleaner, Base (Original Equipment) 55.00 76.00
Air Cleaner, Top (Original Equipment) 30.00 40.00
Air Cleaner, Base (Aftermarket) 29.00 39.00
Air Cleaner, Top (Aftermarket) 29.00 39.00
Air Scoop (Hilburn Style) 105.00 145.00
A/C Bracket - Large (Cast Alum) 34.25 46.00
A/C Compressor, Disassembled 90.00 125.00
Alternator Bracket (2 pc.) 25.00 33.00
Alternator Housing, 2 pc. ( Dissassembled) 65.00 89.00
Alternator Fan 25.00 26.00
Battery Tray 30.00 40.00
Bell Housing 70.00 96.00

 

Blower / EFI Parts

Intake Plenum (LTI Style) 125.00 166.00
Manifold, Lower (LTI/TPI Style) 85.00 110.00
Brake Backing Plate, Pr. 50.00 68.00
Brake Booster (Disassembled only) 75.00 105.00
Brake Calipers, 1 pc. (Disassembled only) 60.00 80.00
Brake Calipers, 2 pc. (Disassembled only) 80.00 110.00
Brake Drums, each 40.00 55.00
Brake Caliper Mounting Bracket 20.00 26.00
Bumpers 95.00-300.00 123.00-405.00
Brush Guard 175.00-350.00 215.00-495.00

 

Carburetor Parts 

1 BBL or 2BBL / Throttle Bodies 105.00 145.00
2 BBL 155.00 215.00
4 BBL 255.00 355.00

 

Carburetor Parts  Holley Style 4 BBL

Body 155.00 215.00
Float Bowl 45.00 61.00
Spacer Block 45.00 61.00
Carb. Spacer 25.00 33.00

 

Auto Parts Continued:

   
Coil Springs, pair 80.00 110.00
Coil Bracket 20.00 26.00
Cross Member (OEM Trans) 45.00 61.00
Drive Shaft (U-Joints Removed) 90.00 124.00
Differential Cover 30.00 55.00
Drop Axle (Front, Street Rod) 195.00 271.00
Engine Block (bare) 300.00 455.00
Fan Spacer 20.00 26.00
Fender Support Bars , pair 30.00 40.00
Four Link Bars (4 or 5 pcs.) 105.00 145.00
Frames - Bare Chassis (call for pricing) 625.00 - up 870.00 - Up
Fuel Tank (new stock & without sodered welds only) 110.00 - up 164.00 - Up
Fuel Straps -pair 25.00 33.00
Gas Pedal (race style) 35.00 47.00
Grill Varies with size Call for pricing
Grill Inserts 50.00-170.00 68.00 - 236.00
Grill Shell 165.50 - Up 230.00 - Up
Hair Pin Rod, pair 130.00 180.00
Half Shaft (U-Joints Removed) 50.00 68.00
Heads, Small Block, pair 205.00 285.00
Heads, Big Block, pair 255.00 355.00
Headlight Bar, 1pc. 105.00 145.00
Headlight Rim, single 30.00 40.00
Headlight rim, dual 55.00 75.00
Headlight Shell, pair 65.00 89.00
Heater Blower Housing 55.00 75.00
Heater Vents, pair 35.00 47.00
Hood Bars/Hood Props 30.00 40.00
Hood Hinge Assembly, pair 95.00 131.00
Hood Springs, pairs 40.00 54.00
Hood Latch 45.00 61.00
Hubs, pair 95.00 131.00
Intake - Air Gap - Small Block 105.00 145.00
Intake - Air Gap - Big Block 130.00 180.00
Intake Manifold, Small Block, Lowrise 80.00 110.00
Intake Manifold, Big Block, Lowrise 90.00 124.00
Instrument Housing 20.00 26.00
Instrument Bezel 15.00 19.00
Ladder Bars, pair 155.00 215.00
Leaf Springs, Small <24", each disassembled 25.00 33.00
Leaf Springs, Small >24", each disassembled 45.00 61.00
License Plate Frame 25.75 31.25
Luggage Rack start at 85.00-2000.00 call for pricing 110.00 - 285.00
Master Cylinder, disassembled 55.00 75.00
Master Cylinder Top (metal only) 17.00 22.00
Muffler Clamp, pair (2pc.) 15.00 19.00
Nerf Bars, pair (plastic inserts must be removed by customer) 155.00-305.00 215.00-425.00
N.O.S. Bottle Holder 36.50 49.00
Oil Dipstick/Tube 20.75 27.00
Oil Filter Cover 26.00 34.50
Oil Pan OEM Style (degreased) 80.00 - up 110.00- Up
Power Steering Bracket 26.00 35.00
Power Steering Pump (disassembled) 55.00 75.00
Power Steering Pulley 20.00 26.00
Pulley , each 20.00 26.00
Radiator Fan 40.00 47.00
Radiator Shroud (metal only) 55.00 75.00
Radiator Core Support 85.00-155.00 117.00-215.00
Rear End Housing (degreased) 190.00 264.00
Rear End cover (degreased) 26.00 35.00
Shift Lever 36.50 49.00
Shift T-Handle 20.75 27.00
Spindle, pair 95.00 131.00
Starter Housing (disassembled) 47.00 64.00
Steering Box (disassembled) 105.00 145.00
Steering Column Tube 47.00 64.00
Strut Brace 80.00 110.00
Sub Frame (after market) 195.00 271.00
Sub Frame (OEM style) 280.00 390.00
Sway Bar 40.00 54.00
Sway Bar Bracket, each 7.25 11.50
Tail Light Housing 55.00-105.00 75.00-145.00
Tail Light Rim 50.00 90.00
Third Member 105.00 145.00
Timing Chain cover 25.00 53.00
Traction Bars, pair (Lakewood Style) 85.00 117.00
Tunnel Ram, small block 180.00 250.00
Tunnel Ram, big block 225.00 306.00
Transmission Housing 180.00 220.00
Transmission Dip Stick Tube 26.00 35.00
Transmission Oil Pan 47.00 64.00
Transmission Tail Piece 40.00 54.00
Trunk Hinge, pair 36.50 49.00
Trunk Latch 26.00 35.00
Valve Covers, pair small block (OEM Style) (no letter masking) 80.00 110.00
Valve covers, pair big block (OEM Style) (no letter masking) 105.00 145.00
Valve Cover Straight Six (no letter masking) 80.00 110.00
Valve Cover, 4 cylinder w/o Overhead cam (no letter masking) 80.00 110.00
Valve cover, 4 cylinder w/DOHC (no letter masking) 90.00 124.00
Valve Covers, pair - Small Block Raised Letters - Masked Letters 105.00 145.00
Valve Covers, pair - Big Block Raised Letters - Masked Letters 130.00 180.00
Water Neck 17.00 22.00
Water Pump Housing (Ford) 40.00 54.00
Wheelie Bar, set 155.00- Up 215.00 - Up

Wheels -- (Per condition & prep requirements.) *Remove tires and or bearings prior to drop-off) - *Not recommended for FORGED ALUMINUM wheels.

80.00- 130.00* Per wheel

110.00-180.00* Per wheel
Wheels, Steel-- OME i.e. Camaro style, classic car steel wheels, with no factory powder coatings. $80.00-115.00 $110.00- 159.00
Wiper Arms, pair (all metal only - check for plastic ends) 40.00 54.00
Yoke 30.00 40.00

 

Motorcycle parts

Air cleaners $30

Battery   

  • Base plate $25
  • Box $25
  • Strap $15
  • Top plate $15

Brackets (S/M/L) $5 to $20

Brakes

  • Arm $20
  • Backing plate $32
  • Calipers - 1 piece $50, 2 piece $65
  • Rotor (hub center) $55
  • Pedals $23
  • Pedal Mount $30
  • Rod $20

Belt Guard $45

Belt Pulley Cover $27

Cam Covers all styles $50

Chain guards

  • FX $35  
  • FL $45

Clutch rod $25

Crash bars (with brackets) $60

Coil Bracket $20

Coil Cover $34

Dash housing $60

Derby Cover $25

Drive Belt Pulley (rear) $60

Engines

  • Cases (pair) $185
    • Big Twin (Evo) $200
    • Sportster $200
  • Cylinder barrels (each) $45
  • With polished edges (each) $105
  • Cylinder heads (each) $80
  • With polished edges (each) $155

Engine skid plate $30

Exhaust Shields $20 per ft.

Exhaust Brackets $20

Fenders

  • Front $80  
  • Rear $120
  • Fender rails FX – FL (set) $55
  • Fender Struts (pair) $55

Foot pegs (pair) $25

Fork legs (front/lower) (set) $100

Fork legs (front/upper) (set) $40

Frames

  • All Harley Davidson $280 and up
  • ATV $250
  • Control arm (each) $25
  • Dirt bike $200 and up
  • Import $280 and up
  • Softail $280 and up
  • Quad (see ATV list)  
  • Moto-Cross dual support $250 and up
  • Rigid $280 and up
  • Swing arm Moto-Cross $70
  • Swing arm FX – FL $70   
  • Swing arm Soft-Tail $60

Gas caps $20

Gas tanks

  • Small tank $150   
  • Sport FXR $205   
  • Fat Boy $305

Hand levers (pair) $25

Handle bars

  • Small $55
  • Large $80

Handle bar clamps (pair) $20

Handle bar control clamps (pair) $40

Handle bar riser $30

Headlights   

  • Rim $20
  • Shell $40
  • Shroud – FL $75
  • Trim set $80
  • Visor $20

Horn cover $25

Hubs (each) $45

Inspection covers $15

Intake Manifold $65

Kickstand & hardware (side) $40

Kickstand (center) $35

Lifter blocks (set) $60

Luggage Rack $50 to $130

Master cylinder $40

Master cylinder cover $15

Manifold $35

Nose cone   

  • Point housing $40
  • Mag. style $55

Oil pump cover $25

Oil pump housing $50

Oil tank   

  • Small stock $80
  • Spun $100
  • New wrap around $60
  • Used wrap around $80

Points cover $17

Primary cover FL/FX/XL $100

Push rod covers (set) $50

Push rod tubes (each) $20

Rocker box covers

  • Shovel-Sportster (set) $120
  • Panhead (set) $100
  • Evolution set (6 pieces) $145
  • Evolution (pair) $105

  • Spacers $20

Shifters $20

  • Mount & Pedal $45

Shock covers (each) $25

Sissy bars $35 and up

Sprockets (no masking) $40

Springs

  • Front end (Springer) $40
  • Shock springs $30

Transmission

  • Bearing plate $50
  • Case $55
  • Case solid mount $75
  • Top cover $30
  • End cover $30
  • Mounting Plate $35
  • Release lever $30
  • Top cover $40

Triple trees

  • Upper $35
  • Lower $50
  • Narrow glide (upper/lower) $60
  • Wide glide (upper/lower) $80

Turn signal bar $30

Turn signals $15 each

Velocity stack $30

Wheels (each)

  • Aluminum spoke (cast/billet) $90 and up
  • Aluminum solid disc (cast/billet) $90 and up
  • ATV (see ATV list)
  • Dirt bike $45 and up
  • Dirt bike (hubs) $25 and up

 

ATV parts

Frame $300 With candy or clear coat $325
Sub-frame (each) $50 With candy or clear coat $75
Swing arm (each) $50 With candy or clear coat $75
Steering stems (each) $30 With candy or clear coat $45
A-arms (each) $25 With candy or clear coat $35
Small rear bumper $15 With candy or clear coat $20
Large rear bumper $30 With candy or clear coat $45
Front bumper $40 With candy or clear coat $60
Nerf bars (each) Starting at $40 With candy or clear coat Starting at $60
Handle bars $30 With candy or clear coat $45
Shift lever $15 With candy or clear coat $20
Shock springs (each) $20 With candy or clear coat $30
Sprockets (each) $20 With candy or clear coat $30
Wheel hubs (each) $30 With candy or clear coat $45
Wheels (each) Starting at $30 With candy or clear coat Starting at $45

 

Rims

Wheel size
Single stage color (each)
Two stage color (each)
Three stage color (each)
14″
$70
$90
$110
15″
$80
$100
$120
16″
$90
$110
$130
17″
$100
$120
$140
18″
$110
$130
$150
19″
$120
$140
$160
20″
$130
$150
$170
22″
$140
$160
$180
24″
$150
$170
$190
26″
$160
$180
$200
28″
$170
$190
$210
30″
$190
$210
$230
*Wire wheels are extra. Used rims with pitted metal or peeling chrome or paint are extra because of preparation costs (stripping, sandblasting and sanding).

 

Jerry Burbaugh - 386-314-4340volusiapowdercoat@gmail.com

Hours: Monday to Friday 9 am - 3:30 pm

203 W. Marion Avenue #3, Edgewater, FL 32132

Website Design by Lisa Day Burbaugh - NSB Web Effects

 

Google+ Facebook